ICP Alltek

  1. ICP Alltek
  2. Products
  3. Coatings for manual application
  4. Lightweight coatings for manual application
  5. Alltek SF30

Alltek SF30

Manual skimming plaster

DESCRIPTION

Alltek Superfine SF30 is a ready mixed white skim plaster with base of very fine natural minerals, organic binder and additives.
It is particularly suitable for obtaining an ultra-smooth surface for the application of lacquers.

USE

  • Interior plaster for walls and ceilings on all standard smooth substrates: its extra smooth texture allows the equalization and skimming of substrates for type A paint finishes.
  • Grouting of wooden joinery and refurbishment of mixed fibre/plaster substrates, painting of furniture.
  • Alltek Superfine SF30 can also be used for filling shallow cracks.
Typical spreadability 0.2 to 0.8 kg/m² per layer depending on condition of substrate.
Recommended thicknesses
  • Min. thickness: 0,1 mm
  • Max. thickness: 1 mm
Packaging
  • Plastic tube 400 ml.
  •  3 litre plastic bucket.

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

0.2 to 0.8 kg/m² per layer depending on condition of substrate.

Density

1,7 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 74%
  • Solid content by volume: 56%

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 2 to 12 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

  • Min. thickness: 0,1 mm
  • Max. thickness: 1 mm

CHARACTERISTICS

  • Easy to apply.
  • Excellent adhesive properties.
  • Outstanding smoothness.
  • Ready to use.
  • Fire rating: A2-s1, d0 as per European standard EN 13501-1.
  • Classification: group III class 2 as per the standard AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608.

PACKAGING AND STORAGE

  • Plastic tube 400 ml
  • 3 litre plastic bucket.
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  • VOC content: < 1 g/l.
  • Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • Plaster, gypsum blocks, plasterboard, cement rendering, old walls, old paintwork, grainy wood.
  • On powdery substrates, apply a fixative.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Plastering knife.
  • Trowel with rounded points.
  • Sanding with grain size 220 to 400.

Recommendations:

  • Ensure adequate ventilation to remove excess moisture and accelerate drying..

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/