24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.
Dimensions : 5cm * 150 m
Boxes of 10 units (150m)
METHOD OF APPLICATION
Preparation of substrate:
The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.
The plasterboard must be fixed and compliant with DTU 25-41.
Plaster over any screw heads.
Manual or machine application with a high pressure pump, with nozzle sizes 531 to 535.
Manual application with Bazooka or supplied by high pressure pump (APLA-TECH system) possible.
Manually plaster the feathered plasterboard section with Alltek Tekjoint Lite (or Alltek Joint 2010 / Alltek Blue Hydro), then press on the jointing tape with the same plaster. Fill the joint mechanically using a loaded Bazooka and press down the tape with a plastering knife.
After drying, skim once or twice manually or mechanically with the finishing attachments.
Sanding with grain size 100 to 150
Ensure adequate ventilation to remove excess moisture and accelerate drying.