ICP Alltek

  1. ICP Alltek
  2. Products
  3. Coatings for manual application
  4. Powder coatings
  5. Aquafill Reboucheur

Aquafill Reboucheur

Powder filling plaster

DESCRIPTION

Aquafill Spackle Powder is a white spackling plaster in powder form for manual application. It is packaged in plastic buckets. Aquafill Spackle Powder is gypsum based with mineral fillers, water retention agents, thickeners and setting regulators.

USE

Plaster for interiors, walls and ceilings on all standard substrates.
Typical spreadability 1 kg of powder per litre volume to be filled.
Packaging 15 kg plastic bucket.

Détails

TECHNICAL SPECIFICATIONS

Grain size

Maximum filler grain size: < 0.1 mm

Typical Spreadability

1 kg of powder per litre volume to be filled.

Density

  • Powder: 0.7 +/- 0.1 kg/l
  • Paste: 1.5 +/- 0.1 kg/l

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 12 to 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

CHARACTERISTICS

  • Fine plaster
  • Little shrinkage
  • Quick hardening
  • Excellent adhesive properties

PACKAGING AND STORAGE

  • 15 kg plastic bucket.
  • Shelf life is 9 months in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  • Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • Plaster, gypsum blocks, plasterboard, cement rendering, old walls, old paintwork, brick.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Make up the mixture: the mixing ratio compared to the powder weight is 55% or about 8-9 litres of water per 15 kg bucket. Pour the powder into the water.
  • Effective usage time: 45 mins.
  • Apply with filling knife or plaster trowel.
  • Sanding with grain size 100 to 150.

Recommendations:

  • Ensure adequate ventilation to remove excess moisture and accelerate drying.

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/