ICP Alltek

  1. ICP Alltek
  2. Products
  3. Coatings for manual application
  4. Lightweight coatings for manual application
  5. Alltek UL

Alltek UL

DESCRIPTION

Ultralight plaster for repair and smoothing, for manual application. Alltek UL is a ready-to-use white plaster. It is shrinkage-free and does not require sanding.

USE

  • Ideal for paint finish for grouting.
  • For a neat finish, sanding may be necessary.
  • On interior and exterior painted woodwork.
  • For external use, Alltek UL must be top coated.
Typical spreadability 1 litre/m² per mm of thickness.
Recommended thicknesses
  • Min. thickness: 0,1 mm
  • Max. thickness: 15 mm
Packaging
  • 1 litre pot.
  • 4 litre plastic bucket.

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

1 litre/m² per mm of thickness.

Density

0,5 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 63%
  • Solid content by volume: 85%

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 2 h on average for a 1 mm application thickness.

Recommended thicknesses

  • Min. thickness: 0,1 mm
  • Max. thickness: 15 mm

CHARACTERISTICS

  • Alltek UL is a plaster with natural, ultralight fillers.
  • Exceptionally easy to apply.
  • Excellent adhesive properties.
  • No shrinkage
  • Fire rating: A2-s1, d0 as per European standard EN 13501-1.
  • Classification: group III class 2 as per the standard AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608.

PACKAGING AND STORAGE

  • 1 litre pot
  • 4 litre plastic bucket.
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  • VOC content: < 2 g/l.
  • Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • Plaster, gypsum blocks, plasterboard, cement rendering, old walls, old paintwork, grainy wood, internal/external painted woodwork.
  • On powdery substrates, apply a fixative.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Plastering knife.
  • Work the product with a plastering knife before use.
  • If necessary, add a little water then stir.
  • Sanding with grain size 150 to 220.

Recommendations:

  • Ensure adequate ventilation to remove excess moisture and accelerate drying.

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/