Alltek LG300

Typical Spreadability

1 litre/m² per mm of thickness.

Density

0,8 +/- 0,1 kg/l

Solid Content

• Solid content by mass: 56%
• Solid content by volume: 65%

Application conditions

• +8°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• 24 to 48 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

• Min. thickness: 1 mm
• Max. thickness: 10 mm

• More comfort, easier handling, greater coverage, smoother finish
• No previous filling and therefore no wastage.
• Fire rating: A2-s1, d0 as per European standard EN 13501-1.
• Classification: group III class 2 as per the standard AFNOR NF T 30-005, in compliance with the standard AFNOR NF T 30-608

• 10 litre plastic bucket.
• Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

• VOC content: < 1 g/l.
• Indoor Air Emission Class

Substrates:

• Application on all substrates: concrete, aerated concrete, mortar, plaster, gypsum blocks, plasterboard, cement, cinder blocks.

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• The plastered surfaces should be pre-glued before papering.
• Conventional plaster knife or with flexible blade.
• Plaster trowel.
• Flexible “Biflex” trowel or similar
• Sanding with grain size 100 to 150.

Recommendations:

• Do not apply Alltek LG 300 to damp substrates.
• It is recommended that a finish coat with Alltek LF50 or Alltek LM150 is applied before painting.