ICP Alltek

  1. ICP Alltek
  2. Products
  3. Coatings for manual application
  4. Lightweight coatings for manual application
  5. Alltek Blue Hydro

Alltek Blue Hydro

Manual lightweight plaster multi-purpose in damp rooms

DESCRIPTION

Lightweight bonding and filling plaster for jointing tapes and face work in damp rooms. Alltek Blue Hydro is a ready-to-use lightweight blue-green plaster.

USE

  • Plaster for damp interior rooms, walls and ceilings on all standard substrates.
  • Alltek Blue Hydro is primarily designed for jointing plasterboards in damp rooms. It may also be use as a smoothing and filling plaster.
Typical spreadability 1 litre/m² per mm of thickness.
Recommended thicknesses
  • Min. thickness: 0,3 mm
  • Max. thickness: 3 mm
Packaging
  • 3 litre plastic bucket.
  • 10 litre plastic bucket.

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

1 litre/m² per mm of thickness.

Density

1,1 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 71%
  • Solid content by volume: 68%

Application conditions

  • +5°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

  • Min. thickness: 0,3 mm
  • Max. thickness: 3 mm

CHARACTERISTICS

  • Ready to use
  • Easy to apply.
  • Excellent adhesive properties.
  • Outstanding resistance to wet abrasion.
  • Excellent filling power.
  • Easily sanded.
  • Fire rating: A2-s1, d0 as per European standard EN 13501-1.
  • Classification: group III class 2 as per the standard AFNOR NF T 36-005, compliant with the standards AFNOR NF T 30-608 and EN NF 13963.
  • Wet abrasion: category A according to the standard NFT 30-608.

PACKAGING AND STORAGE

  • 3 litre plastic bucket.
  • 10 litre plastic bucket.
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  • VOC content: < 2 g/l.
  • Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • Waterpoofed plasterboard, tiles.
  • Glass web, plaster, gypsum blocks, bricks, concrete, old painted substrates, non-flaking and in good condition.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.
  • The plasterboard must be fixed and compliant with DTU 25-41.

Application tips:

  • Stir before use if necessary.
  • Plaster over any screw heads.
  • Fill the feathered sections of plasterboard with Alltek Blue Hydro. Bond then press on the jointing tape.
  • After drying, apply one or two finish coats.
  • Sanding with grain size 100 to 150.

Recommendations:

  • Alltek Blue Hydro is not used under a tiled finish.

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/