News
January 2008
A new plant with capacity of 6000 tons/year is underconstruction in Algeria and shall be in production end of March this year
December 2007
Marketing Agreement has been signed with a company by name of ANIVA in Zedar Croatia
November 2007
A seminar was held in Romania and agreement signed by locally established "Alltek Construct SRL"
October 2007
All UK market increased to 700 tons in 2007. Alltek is now under re-organisation to strengthen our marketing position
September 2007
EU-CE approval for our new lower density plaster-board joint filler has been obtained
August 2007
Construction has started at the ICP mainplant, Lagnieu, France of new 1850 m2 ALLTEK warehouse & distribution centre
May 2007
Tarmac and MMC magazine took a broad view of solid wall construction in their May 07 issue and said of Alltek UK - "...is able to recommend a revolutionary new projected wall finish in place of traditional plastering. Alltek UK has a spray applied product containing neither gypsum nor cement which is instead based on marble. Smoothed off at a thickness of three to five millimetres, it provides a very fine finish and is available in a range of through colours." Read the full article here.
November 2006
The UK market under management of Clive Reeves (Tel. 0796-3723 024) who took over responsibility from February this year is now developed rapidly. Sales to end of October was 475 tons against 180 ton in total for year 2005. Volume for year 2007 is expected to reach +1200 tons – Emphasis is being placed on large project using modern building methods.
October 2006
ICP UK Ltd signed a license agreement on October 23rd 2006 with S.I.R.E. SA, Alger represented by its main owner, Mr Foad El Kurdi and his daughter Dima for installation of a modern Plant for ALLTEK production in Algeria. – Main production equipment is being delivered by MEAB Sweden. The plant is expected to be on line during early summer 2007. – ICP France SAS will in the meantime, and in order to build up a market, supply S.I.R.E SA with ready products from its plant located near Lyon.
May 2006
UAB Lemora of Kaunas, Lithuania who was appointed as exclusive agent for ICP France in May this year have rapidly established a market for ALLTEK in that area and already reached a volume of 125 tons of ALLTEK coatings which corresponds to approx. 75.000 m2 of surface treatment.
March 2006
The Alltek UK Sales operation formerly under management of Hy-Fire Limited Macclesfield, has by mutual agreement been transferred back to ICP France SAS, the main production unit located near Lyon.
ICP France has appointed Clive Reeves as its UK Sales Manager. Clive can be contacted at clive.reeves@alltekuk.com or 07963 723 024.
Technical services, tools, machinery and materials are available on short notice to all areas of the UK. The Alltek UK operation will concentrate its efforts by offering economical and fast solutions of spray-plastering finishing for large construction projects such as hotels, hospitals, prisons and housing developments.
January 2006
The Learning Campus Swindon
Laing O'Rourke has appointed Alltek contractor DCL Interiors Ltd to apply Alltek to the first of 7 schools currently being constructed in North Swindon.
The schools are being built using a Thin Joint Blocks system which greatly reduces build time. Laing O'Rourke required an internal plaster system that would not only provide a quality finish and long term performance but could be applied quickly and cleanly.
The Alltek System enables 200+m2 to be applied in a typical working day ensuring the program will run to time. Alltek is also a green non toxic product which helps to protect the environment and the applicator working with the material.
June 2005
ICP Alltek have produced a new lightweight, easy to use Joint Filler compound Alltek Lite+ to the new EU Standard 3A-EN 13963. This ready mixed plaster board joint filler is supplied in 20Kg plastic tubs and is ready to use. Now available from Stock.
April 2005 - Video
ICP ALLTEK has produced a DVD showing the application of ALLTEK coatings by spray. To obtain a copy please email info@icp-alltek.com, please click here to see the film in a shorter format (Broadband is recommended).
Easter 2005 - New Products
Alltek Joint Filler and Finishing Material for Plasterboard made to the new EU-Standard is now available as "Lite ready mixed" in 20 kilo buckets
Stucco Venetiano, an easy to use product for the professional and DIY user. Supplied ready-mixed in individual packaging sufficient for 10m2, Available in white for tinting or in four different shades.
Spring 2005
The year 2005 has started with an intensive follow up of the Dublin PLANEX exhibition with ICP's technical man Ivar Tomperk being full time in Ireland assisting local 'Alltek Ireland Ltd' to demonstrate the Alltek spray technique and offer training to interested sub-contractors/applicators. ICP France is extending its factory near Lyon with additional 1500 m2 of storage area and adding a further 3000 litre semi-automatic MEAB mixer to increase capacity from present 20,000 to 30,000 ton/year to meet the increasing customer demand for its Alltek range of spray plaster.
Autumn 2004
We took part at the PLANEX Building exhibition Dublin November 4-5-6 and presented our new DVD showing the full application of ALLTEK plus "live" application by our demonstrator Ivar TOMPERK.
Summer 2004
Our new technical service & demo van to support sales in UK, Benelux and Germany. is now on the road and available for booking. Operated by Ivar Tomperk, an expert Alltek applicator, this valuable resource is available for distributors of Alltek Products to further enhance their service when dealing with potential clients.
To find out more about Ivar and his van please email info@icp-alltek.com.
