Machinery
Most heavy duty spraying units using a 'screw type' pump can be used for the application of ALLTEK in smooth or textured finish. Texturing depends on gun/nozzle used set in relation to air-volume pressure from compressor which should have a capacity of minimum 350 l/min at 7batr equal to 12 cfm at 100 psi.
Several well known heavy duty Airless high pressure machines are also suitable for application of our finer grades of ALLTEK which are marked as 'AIRLESS'.
Below are some examples of such machines which have proven to work well with our products.
ICP-HAMA MC3V 110 or 220 Volt Spray Unit with Bag-Emptier, Weight 65 Kilo
Supplied complete with Gun, nozzle, hoses and electric cable.
ICP-HAMA H460 110 or 220 Volt Compressor, Output 450 l/min (16 cfm), weight 69 kilo
Supplied complete with electric cable and airline/fittings to connect to above Spray Unit.WAGNER HC 45E SSP, 220 Volt, Weight 83 Kilo and HC 55E SSP with 380 Volt or Honda Petrol Engine, Weight 100 Kilo
Supplied with optional hopper and bag emptier or with connection for drawing material from container.Graco Mark V 220 Volt Airless Spray Unit, Weight 65 Kilo
Available with hopper and bag emptier or adaptor for drawing material from container.HEMO 10, Heavy Duty 380 Volt Airless Spray Unit with Bag Emptier, Weight 120 Kilo
HEMO 10 is a high performance airless machine specially built in Sweden for all ALLTEK type materials and other high viscosity products.HEMO 10 uses three pistons with feeding of material from hopper.
For more information on our machinery product please contact us on info@icp-alltek.com.
